Authorized Distributor

Free Shipping For Orders Over $50

{"id":3934427119710,"title":"Paragon - BlueBird XL","handle":"paragon-bluebird-xl","description":"\u003cp\u003eThe Paragon BlueBird XL has a new and improved ceramic fiber roof and firing chamber, thicker doors with new gaskets, heavier mandrel holders, and a stainless steel control panel.\u003c\/p\u003e\u003cp\u003eThe BlueBird XL is a dream kiln for the glass bead enthusiast. This 20” wide, 8” deep kiln safely anneals glass to prevent breakage during cooling. With your own Paragon annealing kiln, you will never again worry about stress fractures in your glass.\u003c\/p\u003e\u003cp\u003eThe kiln opens doorways of opportunity in beadmaking. The 10” wide double doors give a total of 20” width for inserting bead rods. This kiln is ideal for seminar teachers. It is like having two kilns in one.\u003c\/p\u003e\u003cp\u003eThe user-friendly 3-key Sentry Xpress digital controller maintains the annealing temperature. Program it for the length of time desired. Adjust the cooling rate through the annealing range. The controller is packed with features but is user friendly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImproved ceramic fiber firing chamber\u003c\/strong\u003e\u003cbr\u003eThe BlueBird XL features new sinusoidal “wavy” elements, which are embedded close to the inner surface of the high-tech, vacuum-formed ceramic fiber top. This is an improvement over our earlier embedded coiled elements, because the “wavy” elements are mounted closer to the surface. This enables the elements to radiate heat faster for longer element life. The ceramic fiber top reduces dust inside the kiln.\u003c\/p\u003e\u003cp\u003eThe BlueBird XL now features ceramic fiber walls and bottom, which replace the firebrick walls and bottom of earlier kilns. The BlueBird XL, with its space-age ceramic fiber, heats faster than ever.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImproved double doors with gaskets\u003c\/strong\u003e\u003cbr\u003eBoth doors are 3 1\/2” x 10” and mounted in a 4 1\/4” high opening. The 3\/4” gap under the doors is filled by flexible, high temperature door gaskets, which help to hold in heat. The 2” thick ceramic fiber doors are twice the thickness of our original doors. The hinges are continuous across the top for extra longevity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBead mandrel holders\u003c\/strong\u003e\u003cbr\u003eThe kiln comes with one single and one double mandrel holder. The single holder supports rods or mandrels from one point; the double cradles the rods at two points. The holders are held to the kiln by magnets so you can adjust the height. They are sturdy and heavy duty for long life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRare-earth magnets hold doors open or closed\u003c\/strong\u003e\u003cbr\u003eRare-earth magnets hold the doors closed while the kiln is heating to annealing temperature. Phenolic knobs on the door handles stay cool to the touch. Use the switch on the front panel to turn off power to the controller when the kiln is not in use and to reboot the controller when needed.\u003c\/p\u003e\u003cp\u003eWe have added a glass rod warmer to the top of the kiln. Pre-heating the glass rods saves production time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHeavy-duty construction\u003c\/strong\u003e\u003cbr\u003eThe steel base supports the kiln in two layers. The upper steel base supports and strengthens the firing chamber; the lower steel base covers the entire kiln bottom where it rests on your worktable. Electrical components are mounted to the lower base, away from the heat.\u003c\/p\u003e\u003cp\u003eThe Sentry Xpress digital controller is mounted under the kiln in an ergonomically sloped panel for easy operation. The design saves table space over kilns with a side switch box. The built-in base stays cool even during extended hold times for the long life of the electrical system. It is slotted to dissipate heat and comes with mar-proof plastic feet.\u003c\/p\u003e\u003cp\u003eThe BlueBird XL plugs into a standard household outlet. The kiln ships by convenient UPS\/FedEx. It ships in a special carton with vacuum-formed padding to assure that the kiln will arrive safely.\u003c\/p\u003e\u003cp\u003eAnd, of course, the BlueBird XL is made in Mesquite, Texas to exacting standards.\u003c\/p\u003e\u003cp\u003eFeatures of the BlueBird XL\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3-key digital Sentry Xpress controller\u003c\/li\u003e\n\u003cli\u003e2 - 3 1\/2” high doors with flexible high temperature gasket\u003c\/li\u003e\n\u003cli\u003eRare-earth magnets hold the doors open or closed\u003c\/li\u003e\n\u003cli\u003eThe firing chamber is 8” deep measured with doors closed; 10” deep measured with doors open\u003c\/li\u003e\n\u003cli\u003eceramic fiber firing chamber for rapid heating\u003c\/li\u003e\n\u003cli\u003e2” thick ceramic fiber doors with flexible gaskets\u003c\/li\u003e\n\u003cli\u003eMandrel holders attach to the kiln with magnets\u003c\/li\u003e\n\u003cli\u003e1500°F maximum temperature\u003c\/li\u003e\n\u003cli\u003eCeramic fiber roof with embedded elements\u003c\/li\u003e\n\u003cli\u003eMar-proof plastic feet\u003c\/li\u003e\n\u003cli\u003eOn-off safety switch\u003c\/li\u003e\n\u003cli\u003eDesigned for production\u003c\/li\u003e\n\u003cli\u003eParagon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eChoose Your Color\u003c\/h5\u003e\u003cp\u003eExpress yourself!\u003c\/p\u003e\u003cp\u003eOne of our favorite features of all Paragon kilns is the ability to choose the color of your oven - Make your purchase truly your own with a splash of paint and make your workshop pop.\u003c\/p\u003e\u003cp\u003eSelecting a color on your oven is absolutely no additional cost and is simply one of the many perks of choosing Paragon.\u003c\/p\u003e","published_at":"2022-06-27T00:55:53-04:00","created_at":"2019-07-25T03:42:21-04:00","vendor":"Paragon","type":"Kiln","tags":["bold_paragon_color_options_blue_standard","function:Ceramics","function:Glass","HasLeadTime","Made To Order","size:Small","voltage:120V"],"price":169517,"price_min":169517,"price_max":169517,"available":true,"price_varies":false,"compare_at_price":188352,"compare_at_price_min":188352,"compare_at_price_max":188352,"compare_at_price_varies":false,"variants":[{"id":29407550963806,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PARAGON_BLUEBIRD_XL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Paragon - BlueBird XL","public_title":null,"options":["Default Title"],"price":169517,"weight":0,"compare_at_price":188352,"inventory_quantity":-18,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.soulceramics.com\/cdn\/shop\/products\/z-BlueBirdXL_Open_Mar2018_W1.jpg?v=1564041921"],"featured_image":"\/\/www.soulceramics.com\/cdn\/shop\/products\/z-BlueBirdXL_Open_Mar2018_W1.jpg?v=1564041921","options":["Title"],"media":[{"alt":"Paragon - BlueBird XL - Soul Ceramics","id":1696769310814,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/www.soulceramics.com\/cdn\/shop\/products\/z-BlueBirdXL_Open_Mar2018_W1.jpg?v=1564041921"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/www.soulceramics.com\/cdn\/shop\/products\/z-BlueBirdXL_Open_Mar2018_W1.jpg?v=1564041921","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Paragon BlueBird XL has a new and improved ceramic fiber roof and firing chamber, thicker doors with new gaskets, heavier mandrel holders, and a stainless steel control panel.\u003c\/p\u003e\u003cp\u003eThe BlueBird XL is a dream kiln for the glass bead enthusiast. This 20” wide, 8” deep kiln safely anneals glass to prevent breakage during cooling. With your own Paragon annealing kiln, you will never again worry about stress fractures in your glass.\u003c\/p\u003e\u003cp\u003eThe kiln opens doorways of opportunity in beadmaking. The 10” wide double doors give a total of 20” width for inserting bead rods. This kiln is ideal for seminar teachers. It is like having two kilns in one.\u003c\/p\u003e\u003cp\u003eThe user-friendly 3-key Sentry Xpress digital controller maintains the annealing temperature. Program it for the length of time desired. Adjust the cooling rate through the annealing range. The controller is packed with features but is user friendly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImproved ceramic fiber firing chamber\u003c\/strong\u003e\u003cbr\u003eThe BlueBird XL features new sinusoidal “wavy” elements, which are embedded close to the inner surface of the high-tech, vacuum-formed ceramic fiber top. This is an improvement over our earlier embedded coiled elements, because the “wavy” elements are mounted closer to the surface. This enables the elements to radiate heat faster for longer element life. The ceramic fiber top reduces dust inside the kiln.\u003c\/p\u003e\u003cp\u003eThe BlueBird XL now features ceramic fiber walls and bottom, which replace the firebrick walls and bottom of earlier kilns. The BlueBird XL, with its space-age ceramic fiber, heats faster than ever.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImproved double doors with gaskets\u003c\/strong\u003e\u003cbr\u003eBoth doors are 3 1\/2” x 10” and mounted in a 4 1\/4” high opening. The 3\/4” gap under the doors is filled by flexible, high temperature door gaskets, which help to hold in heat. The 2” thick ceramic fiber doors are twice the thickness of our original doors. The hinges are continuous across the top for extra longevity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBead mandrel holders\u003c\/strong\u003e\u003cbr\u003eThe kiln comes with one single and one double mandrel holder. The single holder supports rods or mandrels from one point; the double cradles the rods at two points. The holders are held to the kiln by magnets so you can adjust the height. They are sturdy and heavy duty for long life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRare-earth magnets hold doors open or closed\u003c\/strong\u003e\u003cbr\u003eRare-earth magnets hold the doors closed while the kiln is heating to annealing temperature. Phenolic knobs on the door handles stay cool to the touch. Use the switch on the front panel to turn off power to the controller when the kiln is not in use and to reboot the controller when needed.\u003c\/p\u003e\u003cp\u003eWe have added a glass rod warmer to the top of the kiln. Pre-heating the glass rods saves production time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHeavy-duty construction\u003c\/strong\u003e\u003cbr\u003eThe steel base supports the kiln in two layers. The upper steel base supports and strengthens the firing chamber; the lower steel base covers the entire kiln bottom where it rests on your worktable. Electrical components are mounted to the lower base, away from the heat.\u003c\/p\u003e\u003cp\u003eThe Sentry Xpress digital controller is mounted under the kiln in an ergonomically sloped panel for easy operation. The design saves table space over kilns with a side switch box. The built-in base stays cool even during extended hold times for the long life of the electrical system. It is slotted to dissipate heat and comes with mar-proof plastic feet.\u003c\/p\u003e\u003cp\u003eThe BlueBird XL plugs into a standard household outlet. The kiln ships by convenient UPS\/FedEx. It ships in a special carton with vacuum-formed padding to assure that the kiln will arrive safely.\u003c\/p\u003e\u003cp\u003eAnd, of course, the BlueBird XL is made in Mesquite, Texas to exacting standards.\u003c\/p\u003e\u003cp\u003eFeatures of the BlueBird XL\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3-key digital Sentry Xpress controller\u003c\/li\u003e\n\u003cli\u003e2 - 3 1\/2” high doors with flexible high temperature gasket\u003c\/li\u003e\n\u003cli\u003eRare-earth magnets hold the doors open or closed\u003c\/li\u003e\n\u003cli\u003eThe firing chamber is 8” deep measured with doors closed; 10” deep measured with doors open\u003c\/li\u003e\n\u003cli\u003eceramic fiber firing chamber for rapid heating\u003c\/li\u003e\n\u003cli\u003e2” thick ceramic fiber doors with flexible gaskets\u003c\/li\u003e\n\u003cli\u003eMandrel holders attach to the kiln with magnets\u003c\/li\u003e\n\u003cli\u003e1500°F maximum temperature\u003c\/li\u003e\n\u003cli\u003eCeramic fiber roof with embedded elements\u003c\/li\u003e\n\u003cli\u003eMar-proof plastic feet\u003c\/li\u003e\n\u003cli\u003eOn-off safety switch\u003c\/li\u003e\n\u003cli\u003eDesigned for production\u003c\/li\u003e\n\u003cli\u003eParagon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eChoose Your Color\u003c\/h5\u003e\u003cp\u003eExpress yourself!\u003c\/p\u003e\u003cp\u003eOne of our favorite features of all Paragon kilns is the ability to choose the color of your oven - Make your purchase truly your own with a splash of paint and make your workshop pop.\u003c\/p\u003e\u003cp\u003eSelecting a color on your oven is absolutely no additional cost and is simply one of the many perks of choosing Paragon.\u003c\/p\u003e"}
  1. Home
  2. Glass Kilns

Paragon - BlueBird XL

Customize Order
$ 1,695.17 $ 1,883.52
Vendor: Paragon
Our Promise
Product Description

The Paragon BlueBird XL has a new and improved ceramic fiber roof and firing chamber, thicker doors with new gaskets, heavier mandrel holders, and a stainless steel control panel.

The BlueBird XL is a dream kiln for the glass bead enthusiast. This 20” wide, 8” deep kiln safely anneals glass to prevent breakage during cooling. With your own Paragon annealing kiln, you will never again worry about stress fractures in your glass.

The kiln opens doorways of opportunity in beadmaking. The 10” wide double doors give a total of 20” width for inserting bead rods. This kiln is ideal for seminar teachers. It is like having two kilns in one.

The user-friendly 3-key Sentry Xpress digital controller maintains the annealing temperature. Program it for the length of time desired. Adjust the cooling rate through the annealing range. The controller is packed with features but is user friendly.

Improved ceramic fiber firing chamber
The BlueBird XL features new sinusoidal “wavy” elements, which are embedded close to the inner surface of the high-tech, vacuum-formed ceramic fiber top. This is an improvement over our earlier embedded coiled elements, because the “wavy” elements are mounted closer to the surface. This enables the elements to radiate heat faster for longer element life. The ceramic fiber top reduces dust inside the kiln.

The BlueBird XL now features ceramic fiber walls and bottom, which replace the firebrick walls and bottom of earlier kilns. The BlueBird XL, with its space-age ceramic fiber, heats faster than ever.

Improved double doors with gaskets
Both doors are 3 1/2” x 10” and mounted in a 4 1/4” high opening. The 3/4” gap under the doors is filled by flexible, high temperature door gaskets, which help to hold in heat. The 2” thick ceramic fiber doors are twice the thickness of our original doors. The hinges are continuous across the top for extra longevity.

Bead mandrel holders
The kiln comes with one single and one double mandrel holder. The single holder supports rods or mandrels from one point; the double cradles the rods at two points. The holders are held to the kiln by magnets so you can adjust the height. They are sturdy and heavy duty for long life.

Rare-earth magnets hold doors open or closed
Rare-earth magnets hold the doors closed while the kiln is heating to annealing temperature. Phenolic knobs on the door handles stay cool to the touch. Use the switch on the front panel to turn off power to the controller when the kiln is not in use and to reboot the controller when needed.

We have added a glass rod warmer to the top of the kiln. Pre-heating the glass rods saves production time.

Heavy-duty construction
The steel base supports the kiln in two layers. The upper steel base supports and strengthens the firing chamber; the lower steel base covers the entire kiln bottom where it rests on your worktable. Electrical components are mounted to the lower base, away from the heat.

The Sentry Xpress digital controller is mounted under the kiln in an ergonomically sloped panel for easy operation. The design saves table space over kilns with a side switch box. The built-in base stays cool even during extended hold times for the long life of the electrical system. It is slotted to dissipate heat and comes with mar-proof plastic feet.

The BlueBird XL plugs into a standard household outlet. The kiln ships by convenient UPS/FedEx. It ships in a special carton with vacuum-formed padding to assure that the kiln will arrive safely.

And, of course, the BlueBird XL is made in Mesquite, Texas to exacting standards.

Features of the BlueBird XL

  • 3-key digital Sentry Xpress controller
  • 2 - 3 1/2” high doors with flexible high temperature gasket
  • Rare-earth magnets hold the doors open or closed
  • The firing chamber is 8” deep measured with doors closed; 10” deep measured with doors open
  • ceramic fiber firing chamber for rapid heating
  • 2” thick ceramic fiber doors with flexible gaskets
  • Mandrel holders attach to the kiln with magnets
  • 1500°F maximum temperature
  • Ceramic fiber roof with embedded elements
  • Mar-proof plastic feet
  • On-off safety switch
  • Designed for production
  • Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.
Choose Your Color

Express yourself!

One of our favorite features of all Paragon kilns is the ability to choose the color of your oven - Make your purchase truly your own with a splash of paint and make your workshop pop.

Selecting a color on your oven is absolutely no additional cost and is simply one of the many perks of choosing Paragon.

Product Specifications
Model BlueBird XL
Max Temperature 1500 °F
Inside Dimensions 20" W x 8" D x 4.5" H
Exterior Dimensions 29.00" W x 20.00" D x 17.00" H
Volume (Cu. Ft.) 0.47
Power Plug Type NEMA 5-15
Voltage 120
Watts 1,700
Amps 14
Shipping Weight (lbs.) 90
Shipping Lead Time Made To Order - Please Inquire
Warranty 1 Year
* Watts, Amps, Max Temperature, & Power Receptacle are all based on the standard model. A change in voltage, wiring phase, or addition of certain features such as additional elements may cause a deviation from these specifications.
* Image may differ from product received depending on product options chosen.

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Diana S. (Revere, US)
I really like this kiln!

The kiln arrived within the estimated time frame and was extremely well packed. I primarily anneal small items and beads at 950°. I think this kiln is going to be very efficient and cost effective because after 4-6 working hours, holding at 875 ° the outside is barely warm (great insulation) and after shutting off at 700° it take much longer to come to room temperature than my old kiln did. (It is larger so that may account for that.) The controller programmming was a bit difficult to figure out in spite of the 20 page book that came with it (too much info all at once?) but after about an hour of playing around with it I felt quite capable. The display is small but very easy to read with a lot of information visible at a glance. I have only fired a few times to date, but all in all I am extremely pleased. Also, Soul Ceramics was great to deal with, followed up with me on a regular basis after I placed the order and provided amazing response time for inqueries. Very satisfied!

User picture User picture User picture
M
MaryBeth Winslow (Fort Collins, US)
Paragon bluebird xl

Great kiln, impressive updates from Soul Ceramics. It arrived a week or so early. I couldn’t be happier with my purchase. Perfect kiln for beads, pendants and smaller hollow work, Ramps to 1050 in just under 40 minutes.

S
Susan Moore (Boynton Beach, US)

Paragon - BlueBird XL

     * Reviews may be for a similar product in the same series, but a different size.

At Soul Ceramics, we want our customers to know they are getting the best prices online. When you see the blue "Lowest Price Guarantee" words on our website, we are guaranteeing that we have the lowest price anywhere on the internet. In fact, if you find another online store that offers a lower price then us within 30 days of your purchase date please let us know and we will hand you the difference - in cash.  We want you to shop confidently knowing that you are getting the absolute best price on your kiln or wheel.

To request your partial refund, e-mail us a link to the same product on our competitor's website within 30 days from the date of your order and we will process the credit accordingly.

Our Lowest Price Guarantee has some restrictions:

  • You must purchase the item from our website before requesting your partial refund
  • Special promotion offers are not eligible
  • The competitor must be an online store only
  • The website can not be a discounter or auction website, such as eBay
  • The competitor must be an Authorized Retailer for the product
  • The price on the competitor's website must include all shipping and processing fees
  • The model must be "like-for-like" (eg: In-stock vs. In-stock or Made-to-order vs. Made-to-order)
  • The manufacturer must be either Evenheat Kiln, Jen-Ken Kilns, or Paragon Industries
Soul Ceramics reserves the right to refuse payment for any products or offers that do not meet the required definition of a fair market price.

    At Soul Ceramics, we know how annoying it can be when you are hit with hidden costs and fees when you purchase items online. That's why we offer FREE SHIPPING* on all standard orders through Soul Ceramics.

    We even cover extra costs such as lift gate service, so the price you see is the price you pay!

    For the full details on this offer and our detailed shipping and returns policies, click here.

    * Non standard orders include shipments outside of our standard shipping range, and orders that do not include a kiln or pottery wheel in the same shipment. Soul Ceramics reserves the right to inform you of shipping costs before orders are finalized.

    SOUL CERAMICS LLC EDITOR'S NOTE

    The below warranties were taken from the the respective manufacturers and last updated on June 4, 2018. Please note that these below warranties are all for reference only. While we do our best to keep these up to date; the manufacturer has the final say in what their product is warrantied as. Please reference your owner's manual upon purchase, or contact the manufacturer directly if you would like further clarification.

    Please scroll to the appropriate manufacturer's warranty for your kiln.

    Extended Warranty (Provided by Clyde)

    All Clyde warranties are for the core product only. In the case of any kilns/ovens where additional product options are available (Controllers, furniture kits, stands, blade fixtures, vents, etc.) the warranty does not apply, and the warranty would only be applicable to the kiln/oven.

    Evenheat Kiln, Inc. warranty

    Evenheat Kiln, Inc. guarantees to the original purchaser that for a period of two full years (one year for Evolution Series fiber lids) from the date of purchase the kiln will be free of defects in workmanship and materials when used under normal and proper operating conditions. Evenheat will replace or repair any defective part as specified.


    FOR THE WARRANTY TO BE EFFECTIVE THE PURCHASE MUST:

    1. Provide written proof of date of purchase. 

    2. Notify the Evenheat Distributor/Dealer from whom the kiln was purchased, within 10 days after defect has been discovered.

    3. Make kiln immediately available for inspection.

    FOR WARRANTY REPAIRS:

    1. Warranty repairs should be handled through the Distributor/Dealer from whom the kiln was purchased, who will arrange for any repairs or replacement of parts under the terms of this warranty upon receipt of the kiln (or defective part). Otherwise the defective part may be returned (postage prepaid) to Evenheat Kiln, Inc. P.O. Box 399 6949 Legion Drive Caseville, MI 48725. If, after factory examination, the original part is found to be defective, a new or repaired part will be shipped prepaid by Evenheat Kiln, Inc.

    2. If the entire kiln is to be returned to the factory, all transportation costs will be borne by the purchaser. The purchaser should notify Evenheat Kiln, Inc. (989) 856-2281 prior to shipping. Evenheat will help advise the best shipping method and if it is necessary to return the entire kiln or only certain parts. Warranty work will be performed within 30 days after defective part is returned to the factory.

    3. Evenheat Kiln, Inc. reserves the right, at its option, to replace the entire kiln or any part of it in order to fulfill its obligation under this warranty.

    THIS WARRANTY DOES NOT COVER:

    1. Freight damage, kilns altered in any way, abuse or neglect, moisture, improper storage or installation.

    2. Kiln overfired (reaching temperature higher than melting point of ware inside kiln) regardless of cause.

    3. Dawson Kiln Sitter or Limit Timer.

    4. Kilns operated on incorrect voltage.

    5. Improper electrical installation.

    6. Kiln furniture or ware.

    7. Kilns used for reduction or salt firing.

    8. Kilns used for purposes other than the firing of glass materials.

    9. Kilns operated in excess of the cone or temperature on the rating plate.

    10. Damage to Property or personal injury that may occur from kilns that are fired on or near wood floors or combustibles.

    11. Damage to property or personal injury that may occur from improper ventilation of the work area and building structure.

    This warranty is in lieu of all other warranties, expressed, or implied.
    Evenheat Kiln, Inc. neither assumes nor authorizes any Distributor/Dealer, Retailer or employee to assume for it any other obligations or liabilities in connection with Evenheat Kilns.

    This warranty is limited as specified above and excludes incidental or consequential damages. Some states or providences do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

    Evenheat Kiln, Inc.
    P.O. Box 399
    6949 Legion Road
    Caseville, MI 48725
    United States of America

    Speedball Art Products warranty

    Your Speedball Art Products Company purchase comes complete with either a 2-YEAR, 5-YEAR, or 10-YEAR WARRANTY (100% parts & labor when labor performed at Speedball Factory) depending on the product purchased - please review the product page. Speedball Art Products Company warrants this Speedball pottery wheel to be free from defects in materials and workmanship under normal use and service, that would affect its operation for a period of 10 (ten) years from the date of purchase.

    This wheel must be registered within 30 (thirty) days of the date of purchase to make the warranty effective. Registration can be performed either online at http://speedballart.com/warranty_form.php or by contacting our Customer Service Department at 800.898.7224. The obligation of this warranty shall be limited to repairing or replacing any part of the wheel which, at the discretion of the Company, shall be proven defective in materials or workmanship under normal use and service during the time period commencing with the date of purchase. Full wheel replacement will be at the discretion of the Company and will only be considered for claims initiated within 30 (thirty) days of purchase.

    This warranty does not apply to:

    1. Damage caused by accident, abuse, mishandling or dropping.

    2. Units which have been subject to unauthorized repair.

    3. Units not used in accordance with direction.

    4. Damage exceeding the cost of the product.

    5. Damage by flood, lightning or natural disaster, war declared or undeclared.


    In no case shall the Company be liable for any incidental or consequential damages for breach of this or any other warranty, express or implied, whatsoever.

    The limit of this warranty includes the product only and not any loss of work time or contract due to inability to use the wheel.

    Parts in need of repair shall be returned by the customer, shipping prepaid, to:


    Speedball Art Products
    Repairs Department
    2301 Speedball Road
    Statesville, NC 28677

    After any repair or replacement, Speedball Art Products Company will return under normal working schedule and by UPS/FedEx Ground Service (for customers in the Continental United States). Rush repair orders are accepted by purchase order and credit card payment or COD charges. Shipping charges for rush returns other than UPS/FedEx Ground Service must be prepaid via credit card or COD. No U.S. Postal returns. Be sure to wrap the product or parts securely when shipping to avoid shipping damage.

    Policy Statement for Speedball Potter’s Wheel Warranties:

    1. Warranty card must be on file at Speedball Art Products Company

    2. Customer must contact Speedball Art Products Company for Return Authorization Number prior to returning the wheel. Please write the number clearly on the outside of the box.

    3. Parts for warranty repair must be shipped prepaid to Speedball Art Products Company.

    4. Send entire system as a unit control box, motor, foot pedal and all power with no cut cords. Experience has shown that by sending the entire system, repairs are made the first time, made correctly and with less time and trouble for all parties concerned. Full wheel shipments for repair or replacement must be shipped in original packaging.

    5. Enclose a brief description of the problem, along with your name, UPS address, phone number, email address and personal address.

    6. Speedball Art Products Company will pay UPS/FedEx Ground Service shipping back to customer.

    7. Any extra charges due to a request by the customer to rush shipment are to be paid by the customer.

    8. For your convenience, troubleshooting can also be conducted by phone with one of our trained Customer Service Representatives at 800.898.7224, Monday-Friday, 8:00am-5:00pm EST.

    Jen-Ken Kiln Warranty

    JEN-KEN KILNS are warranted to the original purchaser to be free from defects in materials and workmanship when used under normal and proper conditions for the periods specified below. The warranty period begins at the date of original purchase from JEN-KEN KILNS, a JEN-KEN KILN authorized distributor or dealer.

    JEN-KEN KILNS are warranted for 2 years (1 year for the Chili Pepper) from date of original purchase.

    Dawson Kiln Sitter is warranted by a separate 1 year warranty from WP Dawson, Inc.

    PerfectFire panels are warranted by a separate 1 year plan from the manufacturer.

    FireRight panels are warranted by a separate 1 year plan from the manufacturer.


    To Claim under the Warranty, the purchaser must:

    1. Provide written proof of the date of purchase.

    2. Notify JEN-KEN KILN (or distributor/dealer) from whom the kiln was purchased.

    3. Make the kiln immediately available for inspection.

    FOR WARRANTY REPAIRS:

    1. Warranty repairs should be handled from where you purchased the kiln and they will arrange for any repairs or replacement of parts under the terms of the warranty and upon receipt of the kiln or defective part(s). Warranty work, other than that performed at the factory, DOES NOT include labor, just parts. The defective parts may be returned to JEN-KEN KILNS (postage prepaid) 3615 Ventura Drive West, Lakeland, Florida USA 33811. Include your name and address, a letter of explanation and the name and address from where you purchased the kiln. If, after factory examination the part is found to be defective, a new or repaired part will be sent prepaid by JEN-KEN KILNS.

    2. If the entire kiln is to be returned to the factory, all transportation costs are the responsibility of the purchaser. The purchaser should notify JEN-KEN KILNS (863) 648-0585 prior to shipping. We will advise the best shipping method and if it is necessary to return the whole kiln or only certain parts. Factory warranty work will be performed within 30 days after the defective part is returned to the factory.

    3. JEN-KEN KILN reserves the right, as its option, to replace the entire kiln or any part of it in order to fulfill its obligation under this warranty.

    This Warranty DOES NOT Cover:

    1. Freight damage.

    2. Kilns altered in any way after leaving our factory.

    3. Abuse or neglect, moisture, improper storage.

    4. Improper installation.

    5. Kiln Overfires (exceeding the melting temperatures of the materials being fired) regardless of the cause of the overfire. (This does not occur in kiln that are monitored while firing. If in doubt during a firing, turn the kiln off)

    6. Dawson Kiln Sitter or Limit Timer.

    7. Kilns operated on incorrect voltage.

    8. Improper electrical installation.

    9. Kiln furniture.

    10. Kiln ware.

    11. Kilns used for purposes other than firing ceramic or glass materials.

    12. Kilns operated in excess of the temperature rating of the kiln.

    13. Damage that may occur from kilns that are fired on or near combustible materials (i.e.: wood floors).

    This Warranty is in lieu of all other warranties, expressed or implied. JEN-KEN KILN neither assumes nor authorizes any distributor, dealer, retailer or employee to assume for it any other obligation of liabilities in connection with JENKEN KILNS.

    This warranty is limited, as specified above and excludes incidental or consequential damages, so the above limitations or exclusions may not apply to you.

    This warranty give you specific rights and you may also have other rights why vary from state to state.


    JEN-KEN KILNS
    Manufactured by Sir Ramic Porcelain, Inc.
    3615 Ventura Drive West Lakeland, Florida USA 33811
    (863) 648-0585

     

    Olympic Kilns Warranty

    Warranty Registration

    This Warranty Is Applicable to All Kilns Manufactured by Olympic Kilns That Are Used for Ceramics, Pottery and Glass.

    Cone 10 Kilns Have a One-Year Warranty and All Other Kilns Have a Two-Year Warranty. Certain Parts, Thermocouple, Kiln Sitter Tube Assembly, Are Not Covered Under Warranty, Nor Is Kiln Furniture.

    Haugen Manufacturing, Incorporated guarantees to the original purchaser that any defects in OLYMPIC KILNS which become apparent within two years (one year for the Dawson Kiln Sitter and safety timer which is covered by warranty from W. P. Dawson, Inc. and kilns rated at cone 10) will be remedied as specified below.

    Our warranty, of course, does not cover any kiln damaged or altered by you or others after it leaves our factory. Our warranty does not cover damage due to reduction or salt firing, over-firing, exceeding the maximum cone or temperature ratings, improper installation, use of electrical voltages different than those specified, or firing material other than ceramics.

    If a defect of manufacturer becomes apparent, and your retailer does not resolve it to your satisfaction, we will in the following manner: Within (6;) days of the first indication of a defect, tell us in writing of defect, and the date, place and proof of the your purchase. We will contact you to determine what parts seem to warrant repair and to instruct you as to shipment of the kiln parts. You will dismantle, package, and ship the parts we request (and no others), to us at your cost, freight prepaid. If the kiln has a defect of manufacture we will repair, replace or refund as is appropriate, within (30) days. We will ship to you at our cost in your package, for you to reinstall at your cost. If the parts shipped by you to us are in need of repair or replacement for something which is not covered by this warranty, we will not perform the work until you have authorized the work and made arrangements for payment. If substantially an entire kiln is returned for repair under warranty, you will prepay the cost of packaging and shipping both to and from the factory.

    We shall in no event be liable for injuries to persons or property or for incidental, contingent, special or consequential damages arising from the use of our products. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

    OLYMPIC KILNS
    HAUGEN MANUFACTURING, INC.
    P. O. BOX 1347
    4225 THURMON TANNER ROAD FLOWERY BRANCH, GA 30542
    (800) 241-4400

    Paragon Kilns

    Warranty Registration

    Paragon kilns are warranted to the original purchaser by Paragon Industries, L.P. (herein Paragon), subject to the listed exclusions below, to be free of defects in workmanship for the periods specified below. The warranty period begins from date of shipment from the Paragon factory unless date of original purchase from an authorized Paragon distributor or dealer can be established.

    Warranty Periods

    QuickFire kilns:   3 months

    BlueBirds, HT-series, Home Artist, FiberFuse-16, J-series, KM-Series, SC-series, and Vulcans:   1 year

    (Vulcan elements are not warranted.)

    Kilns with a maximum temperature rating above 2300ºF (except Dragons, Iguana and Vikings):   1 year

    TNF 2 Control Boxes (portable), GF, GL, and Fusion series kilns rated 2000°F or lower and all other kilns not listed in this section with a maximum temperature rated 2300ºF or lower:   2 years

    Controllers: Sentry (12 key):   2 ½ years;

    Sentry Xpress (3 key):    the length of the new kiln’s warranty or 1 year on replacement controllers for older kilns.

    Sentinel Smarttouch Controller: 2 1/2 years;

    Sentinel TouchXpress Controller: 2 1/2 years;

    Dragon, Super Dragon, Iguana and Viking kilns:   2 years.

    S-Type thermocouple and APM elements fall within the 2 year warranty. Standard elements on these models:   6 months.

    Sentry controller on these models:   2 ½ years.

    Type-K thermocouple is not warranted on the Dragon, Iguana and Viking.

    These warranty periods apply unless otherwise agreed to in writing.

    This warranty excludes: 1) Kilns or furnaces damaged by overfiring (exceeding the melting temperature of the material being fired) regardless of cause of overfiring; 2) Ware, tools, kiln furniture, or anything inside damaged by overfire; 3) Kilns allowed to exceed the maximum temperature shown on kiln’s nameplate, regardless of cause; 4) Kilns subjected to abuse, neglect, freight damage or improper storage; 5) Kilns used for either reduction or salt firing, 6) Kilns damaged by improper electrical installation; 7) Kilns used for purposes other than firing ceramics, glass, heat treating, or the purpose for which it was intended; 8) Element burnout caused by contact with foreign materials; 9) The patented Dawson Kiln Sitter and/or Limit Timer manufactured by W.P. Dawson, Inc., 399 Thor Place, Brea, California 92621.

    WARRANTY COVERAGE EXTENDS ONLY TO THE ORIGINAL PURCHASER AND DOES NOT COVER REPLACEMENT OF PARTS THAT ARE, BY THEIR NATURE, EXPENDABLE. THIS WARRANTY IS VOIDED IF THE PRODUCT IS ADVERSELY AFFECTED BY ATTACHING ANY FEATURE OR DEVICE TO IT, OR IS IN ANY WAY TAMPERED WITH OR MODIFIED WITHOUT EXPRESS WRITTEN PERMISSION FROM PARAGON INDUSTRIES, L.P.

    Paragon Industries, L.P., will repair or replace any parts that become defective under normal and proper use during the specified period for the kiln purchased, providing the kiln has not been subjected to misuse or the listed exclusions. Paragon will furnish and install replacement parts at the factory with transportation costs to and from the factory paid by the owner; or upon receipt of defective parts at the factory, and after factory examination of the defect, Paragon will furnish replacement parts, complete with installation instructions, shipped postpaid to owner. The warranty on the repaired and/or replaced parts will be limited to the unexpired term of the original warranty.

    Any claim for adjustment under this warranty must include name and address of dealer from whom kiln was originally purchased. Repair or replacement of any defective parts shall fulfill all obligations of Paragon. No other obligations or liabilities are assumed in connection with Paragon kilns nor does Paragon Industries, L.P. authorize its distributors or dealers to assume any other obligations or liabilities on its behalf.

    THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL PARAGON INDUSTRIES, L.P. BE LIABLE FOR ANY LOSS OF PROFITS OR ANY INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF ANY SUCH DEFECT IN MATERIAL OR WORKMANSHIP. NOTE: SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

    This agreement is made in the State of Texas and its validity, construction, and all rights under it will be governed by the laws of the State of Texas. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

    Paragon Industries, L.P.,
    2011 South Town East Blvd.
    Mesquite, Texas 75149-1122
    1-800-876-4328
    Fax: 972-222-0646

    Seattle Pottery Supply Kiln Limited Warranty

    SEATTLE POTTERY LLC d/b/a “Seattle Pottery Supply” warrants to the original purchaser that this product is free from defects in material workmanship for one year from the date of the first retail purchase from an authorized dealer. Transportation charges on product submitted for repair or replacement under this warranty are the sole responsibility of the purchaser. This warranty only applies to the original purchaser and is not transferable.

    UNLESS SPECIFICALLY AUTHORIZED do not Return the Unit to the Place of Purchase.

    Seattle Pottery Supply (“SPS”) will repair or replace, at its expense, any defective part upon return, freight prepaid, to an authorized Seattle Pottery Supply Service Center.

    A unit provided as an exchange will be subject to the warranty of the original unit. The length of the warranty governing the exchanged unit will remain calculated by reference to the purchase date of the original unit.

    This warranty does not cover (1) any defect not reported to an authorized SPS dealer or distributor within 10 days of discovery; (2) Type K Thermocouples; (3) any damage caused by overfiring; (4) products subjected to abnormal strain, freight damage, neglect, abuse, improper storage, failure to follow instructions, or products altered from factory standard condition; (5) products whose identification number has been changed; (6) failures of, or failures caused by, parts or accessories not manufactured or supplied by SPS; (7) kilns used for purposes other than firing ceramic materials; (8) kilns used for reduction or salt firing; (9) repair when normal use has exhausted the life of a part of the equipment as a whole; or (10) failures due to acts of God and other force majeure events beyond the manufacturer’s control.

    How To Obtain Warranty Service: Notify SPS or your SPS distributor within 10 days of discovery of any defect. Deliver any defective part, freight prepaid, to an authorized SPS service center. Other Limitations: Any special, incidental, or consequential damages, including property damage, lost profits, loss of use, or other economic loss, are excluded to the full extent permitted by state law. . Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. Any implied warranties, including the implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this limited warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

    State Law Rights: This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

    How to Request Warranty Service: All repair work must be authorized, either by SPS, or by an authorized SPS distributor, before the work is done. If you believe your kiln is going to require warranty servicing, the first step is to call the SPS distributor from whom you purchased the kiln. If they are unable to provide or coordinate service, call Seattle Pottery Supply and ask for our Technical Service Department for troubleshooting. 206-587-0570

    Notice of Defect may be mailed to:
    Seattle Pottery Supply
    c/o Warranty and Service
    35 S Hanford Street
    Seattle, WA 98134

    (888) 915-1196
    info@seattlepotterysupply.com

    Related Products

    Customer Reviews

    Based on 3 reviews
    100%
    (3)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    D
    Diana S. (Revere, US)
    I really like this kiln!

    The kiln arrived within the estimated time frame and was extremely well packed. I primarily anneal small items and beads at 950°. I think this kiln is going to be very efficient and cost effective because after 4-6 working hours, holding at 875 ° the outside is barely warm (great insulation) and after shutting off at 700° it take much longer to come to room temperature than my old kiln did. (It is larger so that may account for that.) The controller programmming was a bit difficult to figure out in spite of the 20 page book that came with it (too much info all at once?) but after about an hour of playing around with it I felt quite capable. The display is small but very easy to read with a lot of information visible at a glance. I have only fired a few times to date, but all in all I am extremely pleased. Also, Soul Ceramics was great to deal with, followed up with me on a regular basis after I placed the order and provided amazing response time for inqueries. Very satisfied!

    User picture User picture User picture
    M
    MaryBeth Winslow (Fort Collins, US)
    Paragon bluebird xl

    Great kiln, impressive updates from Soul Ceramics. It arrived a week or so early. I couldn’t be happier with my purchase. Perfect kiln for beads, pendants and smaller hollow work, Ramps to 1050 in just under 40 minutes.

    S
    Susan Moore (Boynton Beach, US)

    Paragon - BlueBird XL